Steam cleaning
Steam Car Cleaning
Steam cleaning sanitises the cabin with heat instead of detergent: saturated dry steam at 150°C dissolves grease and kills surface bacteria without chemical residue. Pricing sits above interior washing, from 200 to 260 MAD by vehicle size.
- Duration
- Protocol of 8 steps, each 5 to 20 minutes
- Price
- Quoted above interior washing (200 MAD compact, 260 MAD saloon or SUV)
- Vehicles
- Compact car, saloon, SUV, motorhome
- On site
- 220 V socket, onboard tank of 200 litres
- Steam temperature
- Saturated dry steam at 150°C
- Coverage
- 24 districts across Greater Agadir
- Recommended frequency
- Every 6 months, alongside interior washing
- Guarantee
- Free redo within 24 hours
- Booking lead time
- 24 hours
What steam cleaning includes
Steam cleaning treats ten points inside the cabin that a vacuum or a wipe cannot reach on their own: vents, seams, rails, switchgear, door shuts and seat-belt webbing. Heat alone lifts the grease and kills the bacteria lodged in each one.
- Air vent louvres steamed and wiped
- A fine-jet nozzle directs steam between the louvres of every dashboard vent, followed by a microfibre wipe.Heat softens the greasy dust lodged between the louvres, a deposit a vacuum nozzle alone only shifts.
- Seat seams and stitching sanitised
- A soft-bristle triangular nozzle runs along every seam on fabric and synthetic leather seats.Dust and surface bacteria concentrate in the seam channel, an area a surface wipe never reaches.
- Seat rails treated underneath
- The technician slides each seat fully back and forward to expose the rail, then steams the space beneath it.Sand and moisture trapped under the rail corrode the metal track and support bacterial growth.
- Switchgear and buttons steamed under cover
- Each switch and button is masked before steam reaches it, then wiped dry immediately after.The cover keeps moisture away from the electrical contact while heat dissolves the surface grease around it.
- Door shuts and sills wiped
- Door shuts and sills receive a steam pass followed by a dry microfibre finish.Dust collects in these recesses and transfers onto clothing and luggage during boarding.
- Seat-belt webbing steamed and dried
- The full length of each seat belt is steamed while extended, then dried with a separate microfibre.Webbing sits against skin on every journey and accumulates surface bacteria a vacuum cannot remove.
- Steering wheel and gear lever treated
- Steam reaches the steering wheel rim and the gear lever grip, followed by a dry wipe.These two surfaces carry more hand contact than any other point in the cabin.
- Footwell carpet edges steamed
- Steam treats the carpet edge against each door sill, followed by immediate vacuum extraction of the moisture.Heat kills dust mites lodged in the fibre without soaking the carpet pad beneath it.
- Headliner treated with brief, controlled exposure
- The nozzle stays clear of the fabric and moves continuously, limiting contact time on any single point.Prolonged heat softens the adhesive bonding the headliner to its backing, which then sags once cool.
- Child seat shell and harness sanitised
- The shell, straps and buckle of a fitted child seat receive a dedicated steam pass without removing the seat.A child seat used daily carries organic soiling that an infant touches directly.
What steam cleaning does not cover
Six services sit outside steam cleaning: deep textile extraction, odour removal at its source, damaged leather treatment, exterior bodywork cleaning, pet hair removal and mold removal. Each needs equipment or access a heat-only interior process does not provide.
- Deep extraction of a soaked seat or carpet, which needs an injector-extractor to pull the liquid back out of the fibre.Interior Car Detailing
- Odour removal at its source, for a persistent tobacco, pet or mould smell trapped inside seat foam.Car Odor Removal Service
- Treatment of damaged or cracked leather, where heat from a steam nozzle lifts an already-failing finish.Leather Seat Cleaning & Conditioning
- Exterior bodywork and wheel cleaning, which sits outside an interior, heat-based process entirely.Car Detailing in Agadir
- Removal of loose pet hair embedded in carpet fibre, which needs mechanical extraction rather than heat.Pet Hair Removal from Car Interiors
- Removal of a visible mold colony from carpet backing or door cavities, which needs a dedicated remediation step.Mold Removal from Car Interiors
How we work, step by step
The protocol runs eight fixed steps: protection, heating, vent and switchgear treatment, seat and rail treatment, seal treatment, moisture extraction, drying and inspection. Steam and heat replace detergent at every stage, and step durations run between 5 and 20 minutes.
- 8 min
Protect switchgear and electrical points
The technician masks every switch, button and socket before steam reaches any part of the cabin.
- 5 min
Heat the generator to saturated dry steam
The generator reaches 150°C before the nozzle touches any textile or plastic surface.
- 12 min
Steam air vents and switchgear
The fine-jet nozzle clears every vent louvre and masked switch ahead of the textile zones.
- 20 min
Steam seat seams, stitching and rails
The triangular nozzle passes along every seam, then the exposed space under each seat rail.
- 15 min
Steam door shuts and seat-belt webbing
Door shuts, sills and each fully extended seat belt receive a steam pass in sequence.
- 10 min
Extract residual moisture with a separate-tank vacuum
A separate-tank vacuum follows the nozzle across every treated zone before moisture settles back onto the surface.
- 10 min
Dry every treated surface with microfibre
Each surface receives a dry microfibre pass until no visible moisture remains.
- 5 min
Inspect the cabin with the doors open
The technician opens all four doors for a commented walk-round, with a free redo within 24 hours if a zone needs another pass.
Which equipment we use
Five items complete a steam clean: a saturated dry steam generator, a fine concentrated-jet nozzle, a soft-bristle triangular nozzle, an absorbent long-pile microfibre and a separate-tank wet-dry vacuum. No detergent enters the process at any stage.
- Saturated dry steam generator
- A portable boiler that heats water from the onboard 200-litre tank to 150°C dry steam at low output.Dry steam carries little free water, which stops the treated textile from becoming soaked during the pass.
- Fine concentrated-jet nozzle
- A narrow tip that directs steam into vent louvres, seams and the gap around each switch.A concentrated jet reaches a gap a wide nozzle would flood with excess steam.
- Soft-bristle triangular nozzle
- A flat attachment fitted with soft bristles, used on seats, carpet and rails.The bristles work heat-softened soiling loose mechanically while the steam does the dissolving.
- Absorbent long-pile microfibre
- A long-pile towel reserved for drying, kept separate from any towel used elsewhere in the cabin.Absorbent microfibre lifts residual moisture before it settles back onto a cooling surface.
- Separate-tank wet-dry vacuum
- A 16-amp vacuum with an isolated water tank, run immediately after each steamed zone.The isolated tank collects steam moisture without mixing it into dust already gathered elsewhere in the machine.
Which vehicles and situations suit steam cleaning
Four situations call for steam cleaning. A parent with an infant seat qualifies, along with a hire car carrying a previous renter's residue. A motorhome traveller drawing dust through the vents and a rental fleet car turned over between renters complete the list.
- Parent or allergy-conscious resident with an infant seatA fitted infant or child seat used daily carries organic soiling and dust mites. Steam sanitises the shell, straps and buckle without a chemical spray near the child.
- Hire car with a previous renter's residueA returned rental frequently carries a film of hand grease across the wheel, gear lever and switchgear. Steam clears that film without leaving a scent behind for the next renter.
- Motorhome traveller on the coast roadA motorhome parked overnight near the shoreline draws salt-laden dust through its vents. Steam clears the vent louvres without a water rinse the vehicle's plumbing does not need.Motorhome & Campervan Cleaning in Agadir
- Rental fleet car turned over between rentersA fleet vehicle changes driver every few days. Steam sanitises the wheel, belts and switchgear between bookings without the drying time a full interior wash needs.Rental Fleet Cleaning for Car Hire Companies
What result to expect
Expect a cabin that smells neutral rather than perfumed, with vents, seams and switchgear free of the greasy film that built up before treatment. Steam sanitises and loosens soiling. Steam does not extract liquid from a soaked seat or carpet.
The visible result appears first on switchgear, vents and seams: surfaces that carried a grey, greasy film before treatment come back matte and dry, with no chemical scent left behind. The steering wheel rim and gear lever grip lose the residue built up from repeated hand contact. Vent louvres run clear of the dust that a vacuum nozzle alone only redistributes.
Steam sanitises and loosens soiling, and steam does not extract it. A seat soaked through by a spilled drink or a carpet damp from a flooded footwell keeps its trapped moisture after the pass. Heat softens soiling without pulling the soiling out of the fibre. An injector-extractor, not a steam nozzle, removes that trapped liquid.
Two surfaces limit the treatment. Leather already cracked and plastic hardened by ultraviolet exposure both risk lifting at the finish under repeated heat. The technician tests a discreet area first on an older vehicle before treating the full cabin.
What we need at your address
Four conditions cover a steam cleaning visit at your address: a 220-volt socket within 20 metres and access to a water point for topping the tank. Heat-sensitive items leave the cabin first, and 10 minutes of ventilation follow once the protocol ends.
- 220 V socket within 20 m
- The steam generator and the wet-dry vacuum both run on mains power, drawn from the same socket every other service at your address uses.
- Water point to top up the 200-litre tank
- The generator draws from its own onboard tank first. An outdoor tap lets the technician refill it without cutting a long or multi-vehicle booking short.
- Heat-sensitive items removed from the cabin
- Electronics, documents and wax-based objects come out of the vehicle before the protocol starts, clear of any nozzle pass.
- 10 minutes of ventilation after treatment
- All four doors stay open once the protocol ends, so residual moisture clears the cabin before the vehicle is used.
What steam cleaning costs, and what moves the price
Steam cleaning carries no fixed listing in the price table. The visit is quoted above interior washing, from 200 MAD for a compact car to 260 MAD for a saloon or SUV. Vehicle size, soiling level and any combined interior wash move that quote.
Quoted above the 200-260 MAD interior washing tier, with no travel supplement across the 24 districts we cover in Greater Agadir.
- Vehicle size
- A saloon or SUV adds cabin surface against a compact car, moving the quote toward the 260 MAD end of the interior washing tier it sits above.
- Soiling level
- A cabin carrying pet hair, mould or a heavy grease film on switchgear adds treatment time beyond the standard step count.
- Combination with interior washing
- Booking steam cleaning alongside a 200 MAD interior wash on the same visit avoids a second call-out charge.
Steam cleaning compared with a waterless wash
Steam cleaning treats the interior with heat, quoted above 200 MAD in steps of 5 to 20 minutes. Waterless wash treats the exterior with a spray, at 120 MAD and 40 to 55 minutes: different surfaces, different methods.
| Criterion | Steam Cleaning | Waterless Wash |
|---|---|---|
| Surface treated | Interior cabin: vents, seams, switchgear, belts | Exterior bodywork panels only |
| Method | Saturated dry steam at 150°C | Encapsulating spray wiped with microfibre |
| Water used | Onboard tank, 200 litres capacity | None |
| Duration | Steps of 5-20 minutes each | 40-55 minutes total |
| From, compact car | Above 200 MAD | 120 MAD |
Going further
How coastal humidity in Agadir raises the case for cabin hygiene
Coastal humidity near Agadir's shoreline keeps salt and moisture concentrated within 1 kilometre of the coast, the zone recommended for washing every 15 days instead of 30 inland. Cabin hygiene follows the same climate pressure, favouring steam cleaning every 6 months near the sea.
A vehicle parked within 1 kilometre of the Agadir shoreline sits in the same salt-laden, humid air that shortens the coastal wash interval to 15 days against 30 inland. That humidity does not stay on the paint: closed cabin air trapped inside a parked vehicle carries the same moisture load into seams, vents and carpet backing.
A motorhome parked for an extended stay on the coast concentrates that exposure further, since its cabin stays closed for longer stretches between short journeys than a daily-driven car. Steam cleaning reaches the same vents and seams a coastal humidity load affects first, without adding water to a vehicle already carrying moisture from the air outside.
Steam cleaning questions
Does steam cleaning extract liquid from a soaked seat or carpet?
No. Steam cleaning sanitises and loosens soiling with heat, and a saturated seat or carpet still needs a separate injector-extractor to pull the liquid back out of the fibre.
Is steam cleaning safe on cracked leather or aged plastic?
No. Heat from a steam nozzle lifts the finish on cracked leather and on plastic hardened by ultraviolet exposure, and Leather Seat Cleaning & Conditioning treats that surface instead.
Does steam cleaning need a water connection at the property?
No. The generator draws from an onboard tank of 200 litres, and an outdoor tap only helps top up that tank on a longer, multi-vehicle booking.
Does steam cleaning remove odour at its source?
No. Steam sanitises surface bacteria on contact, and a persistent tobacco, pet or mould odour trapped inside seat foam needs an ozone treatment to reach the source.
How long does each treatment step take?
Each of the 8 steps runs between 5 and 20 minutes, from vent and switchgear treatment through seat and rail treatment to a final inspection with the doors open.
Can a fitted child seat be sanitised without removing it?
Yes. The shell, straps and buckle receive a dedicated steam pass while the child seat stays fitted to its base in the vehicle.
How far ahead do I need to book?
24 hours ahead as standard, and a request placed before 11:00 can be served the same day.
Related services and pages
- Mobile Car Wash in AgadirThe full range of at-address services across Agadir and the surrounding communes.
- Car Detailing in AgadirThe protection and restoration services beyond an interior clean: correction, coating and paint work.
- Waterless Car WashThe exterior, light-dust method compared against steam cleaning in the section above.
- Interior Car DetailingThe vacuum, shampoo and extraction service that removes soiling steam only loosens.
- Leather Seat Cleaning & ConditioningThe cold-process treatment for leather already cracked, where steam heat is unsuitable.
- Car Odor Removal ServiceThe ozone treatment that reaches a persistent odour at its source, beyond surface sanitising.
- Pet Hair Removal from Car InteriorsThe mechanical extraction service for pet hair embedded in carpet fibre.
- Mold Removal from Car InteriorsThe remediation service for a visible mold colony, beyond what surface heat sanitises.
- Motorhome & Campervan Cleaning in AgadirThe dedicated service for a larger cabin exposed to coastal humidity over an extended stay.
- Rental Fleet Cleaning for Car Hire CompaniesA recurring sanitising schedule for a hire fleet turned over between renters.
- Car Detailing Prices in AgadirThe full MAD price list for washing, detailing and protection work.